Relay
Pricing
Get started
Pricing
Get started
Free tools

How to price refrigerant per pound: R-410A vs R-454B

Free from Relay, no signup. Defaults and sources checked November 9, 2026.

Price refrigerant by the pound, on its own line next to the labor. Your cost per pound is the cylinder price divided by the pounds in it, plus what each pound costs you to handle; the price per pound is that cost divided by one minus your target margin. Keep R-410A and R-454B on separate lines: at the supply house we checked on November 5, 2026, R-454B cost 3.8 times as much per pound.

Refrigerant

$

What your supplier charges you. The default is one supply house's list price; see the sources below.

lb

Enter fewer if you can't use the last of the cylinder.

$

What each pound costs you beyond the cylinder, such as supply-house trips and empty-cylinder disposal. $2 is an example.

%

Overhead is recovered in the labor price, so this is profit on the refrigerant itself.

lb

What you weigh in on the job. 5 lb is an example.

R-410A price per pound

$15.98

$3.20 profit per pound, a 25% markup on cost.

Cost per pound
Refrigerant$10.78
Handling$2.00
Your cost per pound$12.78
This charge
Refrigerant for 5 lb$79.90
Your cost$63.92
Profit$15.98
Price per pound at other margins
Per pound at a 20% margin$15.98
Per pound at a 30% margin$18.26
Per pound at a 40% margin$21.31
Per pound at a 50% margin$25.57
Per pound at a 60% margin$31.96

Refrigerant only, before tax. Price the recharge or leak search labor with the flat-rate calculator.

Labor and refrigerant on separate lines

The labor and the refrigerant vary independently. The pounds depend on the system and the leak, and the cost of each pound depends on the refrigerant. Price the work as a flat-rate service and the refrigerant per pound, and one price list covers every system.

Relay's starter assumption for a refrigerant evacuation and recharge is 1.5 hours of labor, with refrigerant billed separately. At the flat-rate calculator's defaults ($106 an hour of labor and overhead, a 20% net margin) that's $199. Put in your own rates with the flat-rate price calculator.

What refrigerant costs you

List prices at Elliott Electric, a supply house that sells both refrigerants, on November 5, 2026:

List prices before tax, read November 5, 2026. Cost per pound is the cylinder price divided by its pounds.
RefrigerantCylinderList pricePer pound
R-410A25 lb$269.61$10.78
R-454B20 lb$823.59$41.18

One supply house is not a market price, and refrigerant prices move. EPA's 2026 rule notes that R-454B was hard to get in service cylinders in some regions in 2025. Use your own invoice cost, and enter only the pounds you actually get out of a cylinder: what's left in it raises your real cost per pound.

R-410A, R-454B and the EPA rules

The rules decide which refrigerant you'll be charging and how its supply changes:

  • New systems: under EPA's Technology Transitions rule, new residential and light commercial split systems must use a refrigerant with a global warming potential under 700. U.S. manufacturers already make this equipment with R-32 or R-454B, and installing new R-410A systems built or imported after January 1, 2025 is prohibited.
  • R-410A inventory: EPA's May 2026 final rule, effective July 27, 2026, removed the installation deadline for systems whose components were all made or imported before January 1, 2025, so that equipment can still be installed.
  • Repairs: components used to repair existing systems aren't restricted, and EPA says you can continue to repair existing systems. R-410A condensing units, compressors and coils made after January 1, 2025 must carry the label "For servicing existing equipment only."
  • Supply: the AIM Act phasedown cuts HFCs to 60% of historic baseline levels for 2024 through 2028, 30% for 2029 through 2033, 20% for 2034 and 2035, and 15% from 2036 (EPA). EPA's 2026 rule says the price of legacy HFC refrigerants may rise as the phasedown continues.

So you'll keep buying R-410A for repairs while its supply shrinks. Review its price per pound each time your cylinder cost changes, not once a year.

Extra pounds, leak searches and recovery

  • Extra pounds: quote the pounds you expect and bill the pounds you weigh in. At the example R-454B price, each extra pound adds $53.97 without repricing the job.
  • Leak search: its own flat-rate service, 1.5 hours in Relay's starter pricebook ($199 at the calculator defaults).
  • Recovery: 1 hour when the charge has to come out before a repair or replacement ($133).

Worked example

The same evacuation and recharge on an R-410A system and an R-454B system, with an example 5 lb charge, the Elliott Electric cylinder prices above, $2 a pound of handling and a 20% net margin.

Labor at $106 an hour of labor and overhead, priced at a 20% margin.
LineR-410AR-454B
Cylinder$269.61 for 25 lb$823.59 for 20 lb
Refrigerant cost per pound$10.78$41.18
Plus handling per pound (example)$2.00$2.00
Your cost per pound$12.78$43.18
Price per pound at a 20% margin$15.98$53.97
Refrigerant, 5 lb$79.90$269.87
Evacuation and recharge labor, 1.5 hours$198.75$198.75
Ticket total$278.65$468.62

The labor is identical; the refrigerant line makes the difference. A single flat recharge price would either overcharge R-410A customers or lose money on R-454B systems.

Refrigerant pricing in Relay

Relay's starter HVAC pricebook has R-410A, R-454B and R-32 as separate per-pound items. Its evacuation and recharge, leak search and recovery services come with labor hours filled in for you to review and price, and bill refrigerant separately. A service's price can be entered by hand or calculated from its labor and materials, and each service shows its expected cost and margin. When your cylinder cost changes, update the price; estimates and invoices you've already sent keep theirs. Relay is $99 a month for 1–2 technicians or $199 for 3–9.

Questions

How much does a cylinder price change move my price per pound?

Divide the change by the pounds in the cylinder, then by one minus your margin. A $50 increase on a 25 lb cylinder adds $2 a pound to your cost and $2.50 a pound to your price at a 20% margin.

Should refrigerant carry a different margin from other parts?

It can. In this method overhead is recovered in the labor price, so the margin on refrigerant is profit on the refrigerant alone. If you top up systems under a labor warranty, choose a margin that also covers the refrigerant you put in without billing it.

How do I price R-32?

The same way, on its own per-pound line priced from its own cylinder cost. EPA's 2026 rule notes that U.S. manufacturers already make residential equipment using R-32 or R-454B.

How to price a capacitor replacement
Book a demo

All free tools

Product

  • All features
  • AI Front Office
  • Business Phone
  • Website
  • Booking
  • Pipelines
  • Scheduling & dispatch
  • Mobile App
  • Pricebook
  • Inventory
  • Time tracking & timesheets
  • Estimates & proposals
  • Invoicing & payments
  • Customer management
  • Maintenance plans
  • Review requests
  • Customer campaigns
  • Reports & profitability

Compare

  • Relay vs Housecall Pro
  • Relay vs Jobber
  • Relay vs ServiceTitan
  • Relay vs Workiz
  • Relay vs FieldPulse

Industries

  • HVAC
  • Plumbing
  • Electrical
  • Garage door
  • Appliance repair

Legal

  • Privacy
  • Terms
  • SMS Policy
  • Account Deletion

Company

  • About
  • Guides
  • Free tools
  • Help center
  • Contact
  • Support
© 2026 Relay Ops, Inc.