How to price a capacitor replacement: flat-rate example
Free from Relay, no signup. Defaults and sources checked November 9, 2026.
A flat-rate capacitor replacement price is the labor and the part at your margin: labor hours × (labor cost + overhead per billable hour), plus what the capacitor costs you, divided by one minus your target margin. Relay's starter assumption is 0.75 hours for a dual-run capacitor. With $106 an hour of labor and overhead, a $20.98 capacitor and a 20% net margin, the replacement is $126. The diagnostic that found the failed part is a separate line.
Time on site, plus drive time if you don't charge it separately.
Wage plus payroll taxes and benefits, divided by the share of paid hours you bill. Work out yours.
Yearly overhead, including trucks if your labor cost leaves them out, divided by the hours your technicians bill.
Profit as a share of the price, after labor, overhead and materials.
Flat-rate price
$126
$25 profit, a 25% markup on cost. Works out to $167 per labor hour.
| Labor | $50 |
|---|---|
| Overhead | $30 |
| Parts and materials | $21 |
| Total cost | $100 |
| Price at a 10% margin | $112 |
|---|---|
| Price at a 20% margin | $126 |
| Price at a 30% margin | $144 |
| Price at a 40% margin | $167 |
| Price at a 50% margin | $201 |
Prices before tax. Rounded to whole dollars; 0.75 labor hours.
What the job includes and how long it takes
In Relay's starter pricebook, the replacement covers swapping the dual-run capacitor and checking compressor and fan startup, amp draw and system operation. It assumes 0.75 hours of labor and one capacitor as the only part. Treat the hours as a starting point and replace them with your own job times.
Keep the diagnosis out of this price. Whether you charge a service call fee or price a no-cool diagnostic as its own flat-rate service (1 hour in Relay's starter pricebook), the capacitor line then costs the same whether the technician found the part on a no-cool call or a maintenance visit.
What the capacitor costs you
The part price varies more than the labor. Three public listings for a 45/5 µF round dual-run capacitor on November 5, 2026:
| Seller | Part | Price |
|---|---|---|
| US Supply | Lennox by Mars 89M80, 45/5 µF, 440 V | $20.98 |
| Budget Heating | Generic PPS545440RD, 45/5 µF, 370/440 V | $33.50 on sale ($48.00 list) |
| PartsSource | Titan HD PRCFD455A, 45/5 µF, 370 to 440 V | $35.03 |
Use what you pay. The calculator starts at $20.98. If you stock the $35.03 part instead, your cost rises by $14 and the price by $18 at a 20% margin.
Contactors, hard start kits and other add-ons
Give each add-on its own line so the technician can add it to the ticket without changing the capacitor price. Relay's starter assumptions, with one supply-house price for each part:
- Contactor: 0.75 hours on its own. A 30 A contactor with a 24 V coil and one pole plus shunt (Mars 61320) lists at $31.00 at US Supply. When it's replaced on the same visit as the capacitor, the diagnosis is done and the unit is already open, so you may want a separate add-on line with less time, for example 0.5 hours.
- Hard start kit: 1 hour. A Supco SPP6 lists at $14.22 at US Supply.
Worked example
A no-cool call where the technician replaces the dual-run capacitor, using the calculator defaults ($66 labor cost and $40 overhead per billable hour, a 20% net margin), Relay's starter labor hours and the US Supply part prices above.
| Line | Labor hours | Part | Your cost | Price |
|---|---|---|---|---|
| No-cool diagnostic | 1 | None | $106.00 | $133 |
| Replace dual-run capacitor | 0.75 | $20.98 | $100.48 | $126 |
| Ticket total | 1.75 | $20.98 | $206.48 | $258 |
| Add-on: replace contactor | 0.75 | $31.00 | $110.50 | $138 |
| Add-on: install hard start kit | 1 | $14.22 | $120.22 | $150 |
If you charge a flat service call fee instead of pricing the diagnostic, put your fee on the first line. Change the labor cost, overhead or margin in the calculator and the same hours and parts give your prices.
Capacitor pricing in Relay
Relay comes with starter HVAC services for single- and dual-run capacitor replacement, contactor replacement and hard start kit installation, each with labor hours and the part filled in for you to review and price. A service's price can be entered by hand or calculated from its labor and materials, and each service shows its expected cost and margin. When you change a price, estimates and invoices you've already sent keep theirs. Relay is $99 a month for 1–2 technicians or $199 for 3–9.
Questions
Should single-run and dual-run capacitor replacements have separate prices?
Relay's starter assumptions are 0.75 hours for a single-run and 0.75 hours for a dual-run capacitor, so compare the parts you stock. If the capacitors you stock cost about the same, one price keeps the pricebook shorter. If they don't, use two lines priced from their own part costs.
How do I price a capacitor replacement after hours?
Keep the capacitor price the same and add an after-hours charge as its own line. The customer sees the same repair price at any hour, and the charge for the time of day is stated separately.
Should the capacitor carry the same margin as the labor?
This method applies one margin to the whole job, so the part earns the same margin as the labor. If you use a parts markup table instead, price the part from the table and the labor from your cost per hour, then check that the total still meets your target margin.