Relay
Pricing
Get started
Pricing
Get started
Free tools

HVAC parts markup calculator and sliding-scale markup chart

Free from Relay, no signup. Defaults and sources checked November 9, 2026.

Markup is profit as a share of your cost; margin is profit as a share of the price. A part that costs you $25 and sells for $100 has a 300% markup, a ×4 multiplier and a 75% margin. A sliding scale gives cheap parts a higher multiplier than expensive ones. Enter a part cost, edit the example scale, and print the chart.

$

What your supplier charges you. $25 is an example.

Markup

Sliding scale tiers
Part cost fromMultiplier
$
×
$
×
$
×
$
×
$
×
$
×

An example to edit: one contractor's published schedule, not an industry standard.

Selling price

$100.00

×4 for parts costing from $10.00 to $49.99: a 300% markup and a 75% margin.

This part
Your cost$25.00
Profit$75.00
Multiplier×4
Markup (profit ÷ cost)300%
Margin (profit ÷ price)75%

Before tax. If your labor prices already carry overhead, the part's markup only has to cover the cost of stocking it, callbacks and profit on the part.

Your markup chart

Selling price = part cost × multiplier. A part that costs exactly a tier's starting cost uses that tier.
Part costMultiplierMarkupMarginSelling price
Under $10.00×5400%80%$0.00 to $49.95
$10.00 to $49.99×4300%75%$40.00 to $199.96
$50.00 to $99.99×3200%66.7%$150.00 to $299.97
$100.00 to $199.99×2100%50%$200.00 to $399.98
$200.00 to $499.99×1.770%41.2%$340.00 to $849.98
$500.00 and up×1.550%33.3%$750.00 and up

How the price is calculated

  • Selling price: part cost × multiplier.
  • Markup: (price − cost) ÷ cost, which is the multiplier minus one.
  • Margin: (price − cost) ÷ price, which is 1 − 1 ÷ multiplier.
  • Sliding scale: the part's cost picks the tier, and that tier's multiplier sets the price. A part that costs exactly a tier's starting cost uses that tier, so a $10.00 part is in the $10.00 to $49.99 tier.

Every tier boundary is a price step. On the example scale a $49.99 part sells for $199.96 and a $50.00 part for $150.00. Check each boundary on the printed chart; where a step is bigger than you'd want to explain to a customer, bring the two multipliers closer or add a tier between them.

Markup vs margin

Both describe the same profit. Markup divides it by your cost and margin divides it by the price, so the margin is always the smaller number. To convert, margin = markup ÷ (1 + markup) and markup = margin ÷ (1 − margin).

Pure arithmetic: multiplier = 1 + markup; margin = 1 − 1 ÷ multiplier. Percentages rounded to one decimal place.
MarkupMultiplierMargin
10%×1.19.1%
20%×1.216.7%
25%×1.2520%
33.3%×1.3325%
50%×1.533.3%
66.7%×1.6740%
75%×1.7542.9%
100%×250%
150%×2.560%
200%×366.7%
300%×475%
400%×580%

Matt Michel's example in Contracting Business: a 20% markup on a $100 part is $120, a margin of 16.67%, while a 20% margin needs a price of $125 ($100 ÷ 0.8). Apply a 20% markup when you meant a 20% margin and every part sells $5 short for each $100 of cost.

Where the example scale comes from

The calculator's scale is one contractor's published schedule: Wendell Bedell's in HVACR Business (April 2022), from ×5 on parts under $10 to ×1.5 on parts of $500 and up. He applies it to the part's cost after sales tax and presents it as a warranty reserve for callbacks: low-cost parts, he writes, “require a higher warranty reserve mark-up.” It's an example, not an industry standard. The other trade sources we read use the same idea with different numbers:

  • Profit Rhino, a flat-rate pricebook vendor, ships a default markup table it describes as “a sliding scale that has your most inexpensive parts marked up more aggressively.” Its examples: a $1.00 part marked up 400% to $5.00, and an $80.00 part 100% to $160.00. The table is “100% customizable” (Profit Rhino support).
  • Plumber magazine (January 2025) suggests 400% or more on small items such as fittings, washers and O-rings, 50% to 75% on mid-range items such as faucets and valves, and 25% to 40% on big-ticket items such as water heaters.
  • Matt Michel, writing in Contracting Business (2006), warns that markup tables borrowed from a supplier “have little or no bearing on your business or conditions” and that “Your mark-up should be calculated to achieve a targeted net profit.”

The $25 part and the 50% single markup in the calculator are examples too.

Parts markup inside a flat-rate price

In flat-rate service pricing, the part's markup is one of four inputs. Gary Elekes lists them in ACHR News: “a labor time, a retail labor rate, a parts cost, and a parts markup.” When your labor rate already recovers overhead, Michel's advice is “don't double charge for it here”: the markup should cover the cost of carrying parts in stock, such as the money tied up and shrinkage, plus your profit.

Our flat-rate price calculator takes the other route: it adds parts at your cost and applies one margin to the whole job. Use one method or the other for a service, not both, or the part is marked up twice.

Material markups in Relay

Relay's pricebook has a material markup schedule: cost bands, each with a markup, and the margin each band produces shown beside it. A material set to use material markups takes its price from its unit cost and the band that cost falls in; turn that off on any material to type its price instead. New accounts start with an example schedule, 150% on materials under $50 down to 30% above $500, for you to edit. Before a schedule change is applied, Relay lists each price it would change, old and new; estimates and invoices you've already sent keep their prices. The pricebook also shows each service's expected cost and margin. Relay is $99 a month for 1–2 technicians or $199 for 3–9.

Questions

How does a discount affect markup and margin?

A discount comes off the price, so work it out against margin. In a PHCP Pros example, a $1,000 job marked up 10% sells for $1,100; a 10% discount takes it to $990, $10 below cost. Pricing for a 10% margin instead gives $1,111.11, and a 10% discount from that brings you back to the $1,000 cost: no loss, but no profit either. Price for the margin you want after the largest discount you give.

What if a customer finds the part cheaper online?

Expect the conversation. Roger Grochmal, CEO of AtlasCare, told ACHR News in 2014 that parts prices "are all over the Internet, which causes a lot of conversations to occur." Butch Welsch of Welsch Heating and Cooling said combining parts and labor into one flat-rate price "reduces the number of aggravated calls." The online price also doesn't include getting the part to the job or coming back if it fails.

Should parts be marked up on time-and-materials jobs?

Yes. ACHR News describes time-and-materials pricing as the cost of materials used "plus a markup to cover overhead and profits." If your hourly rate already recovers overhead, the part's markup only has to cover the cost of stocking it, callbacks and profit on the part.

Price a job with the flat-rate calculator

Related guide: Plumbing pricebook software.

Book a demo

All free tools

Product

  • All features
  • AI Front Office
  • Business Phone
  • Website
  • Booking
  • Pipelines
  • Scheduling & dispatch
  • Mobile App
  • Pricebook
  • Inventory
  • Time tracking & timesheets
  • Estimates & proposals
  • Invoicing & payments
  • Customer management
  • Maintenance plans
  • Review requests
  • Customer campaigns
  • Reports & profitability

Compare

  • Relay vs Housecall Pro
  • Relay vs Jobber
  • Relay vs ServiceTitan
  • Relay vs Workiz
  • Relay vs FieldPulse

Industries

  • HVAC
  • Plumbing
  • Electrical
  • Garage door
  • Appliance repair

Legal

  • Privacy
  • Terms
  • SMS Policy
  • Account Deletion

Company

  • About
  • Guides
  • Free tools
  • Help center
  • Contact
  • Support
© 2026 Relay Ops, Inc.