Plumbing pricebook software: flat rate, staged pricing and costs
Published by Relay. We make field service software, so we are one of the options in this space. Details about other products come from their own pricing pages and help documentation, checked November 9, 2026.
A plumbing pricebook works for jobs you can define before you start, like a fixture replacement or a water heater swap with normal access. For concealed leaks and drains, where the price depends on what you find, price the first step and quote the rest once you know. On the software side, Housecall Pro gives you a free list of services (without prices) and flat-rate pricing from $229 a month for one user ($299 for five), and Profit Rhino sells ready-priced content from $39 per technician a month plus required coaching.
Write the scope before you set the price
A flat price is only as good as the scope behind it. Each item should say what's included, how much (one fixture, one valve, one water heater), what access you're assuming, and what isn't included. For example: "Replace kitchen faucet. One faucet, working shutoff valves under the sink, new supply lines included, old faucet hauled away."
That last part matters when things go sideways. If the shutoff valves are seized, replacing them is a separate item the customer approves before you do it, not a surprise on the invoice. Write the scope for the customer, too. If an access assumption only lives in a tech's private note, the customer never agreed to it.
How to price "it depends" work
With a concealed leak or a slow drain, you don't know the job until you're into it. Pricing the whole thing up front means padding the price or eating the overrun. Pricing in stages works better, with each stage as its own item and its own approval:
- Find it. A set price to locate the leak or diagnose the drain, with a clear stopping point: what you'll do and what you'll report back.
- Fix the defined part. Once the wall is open or the camera has run, the repair is usually a normal pricebook item, like replacing a section of pipe or clearing the line from a cleanout.
- Price access separately. Clearing a drain through an accessible cleanout, by pulling a toilet, or from the roof are different jobs. Make them different items, so the price changes for a reason the customer can see.
- Keep restoration out. Drywall and finish work after a leak is a separate item or a referral, and the first estimate should say so.
Each stage is a short estimate the customer can approve on the spot. Your pricebook has to make that fast: a tech should be able to add the next step from a phone and get it approved without leaving the house.
Water heaters
Water heaters deserve extra care because the ticket is large and you sell them often. Build them from parts rather than one line: the unit, standard installation labor, haul-away, and the items that depend on the house or local code, such as an expansion tank, a drain pan, venting changes or a permit. Then offer two or three options, such as different capacities or tank versus tankless, built from the same parts.
Parts pay off when equipment costs change. Update the unit's cost once, look at the new margin, and decide whether to reprice. Estimates customers have already approved should keep the price they agreed to.
Markup, margin and the price the customer sees
Example: a repair priced at $200, made up of one hour billed at $140 and materials sold for $60. Direct labor costs you $45 and the materials cost $40, so direct cost is $85. Gross margin is $115, or 57.5% ($115 ÷ $200).
The materials show why markup and margin get mixed up. Selling $40 of material for $60 is a 50% markup ($20 ÷ $40) but only a 33.3% margin ($20 ÷ $60). If you want a 50% margin on materials, you need a 100% markup. Check which one your software asks for: typing 50 into a markup field when you meant margin underprices every part.
| Markup on cost | Margin on price | Price for $100 of cost |
|---|---|---|
| 25% | 20% | $125 |
| 33.3% | 25% | $133.33 |
| 50% | 33.3% | $150 |
| 100% | 50% | $200 |
All of this is gross margin. Overhead, drive time, card fees and callbacks come out of it before you see any profit.
What pricebook software costs
- Housecall Pro. A free price book of common services comes with every plan, but you enter the prices. Flat-rate pricing with margins starts on Essentials, which Housecall Pro lists for plumbing companies at $299 a month for five users ($229 for one). See Housecall Pro pricing.
- Profit Rhino. SmartPrice, a digital price book with a sales presentation, costs $39, $49 or $59 per technician a month, and coaching and implementation are required at a price that isn't listed. Integrate loads flat-rate data into your existing software for $299 a month (data only), or $99 a month plus $55 per technician for Data & Sales, plus required coaching and implementation. Through Housecall Pro, the Profit Rhino price book is $199 a month, updated quarterly, and its items can't be edited in the mobile app.
- Workiz. A basic price book is on every plan; flat-rate pricing needs the Ultimate plan. Workiz doesn't publish prices, so you'll need to request a quote.
- FieldEdge and ServiceTitan. FieldEdge Flat Rate comes with every FieldEdge plan, and ServiceTitan sells Pricebook Pro as one of its Pro upgrades. Neither publishes pricing, and ServiceTitan prices per technician, so ask whether Pricebook Pro is part of the plan you are quoted.
What to test in a demo
- Build a leak job in stages: a locate price, then the repair added on site, each approved separately.
- Build a water heater from parts, change the unit's cost, and watch the margin move before you reprice.
- Find out whether the product asks for markup or margin, and enter the materials example above to check.
- Change a price and confirm that estimates already approved keep the old one.
- Open the estimate as the customer and check that scope and exclusions are visible, not buried in tech notes.
How Relay handles plumbing pricing
Relay includes starter plumbing and HVAC services with structured labor and materials. You review each one and adopt it; some come with a suggested starting price, others need yours. Adopted items belong to you, so changes to the starter list never reprice them.
Price a service by hand or calculate it from labor and materials, and Relay shows expected cost and margin. Bulk price changes are reviewed before they apply, and existing estimates and invoices keep their prices. Estimates can carry several options, and techs can build them and capture the customer's signature on site, even with no signal.
Relay is $99 a month for 1–2 technicians or $199 for 3–9 with unlimited office users. It doesn't come with a priced library that someone maintains for you, so if you'd rather pay to have prices kept current, Profit Rhino is the closer fit. See the plumbing overview for how pricing connects to scheduling and invoicing.
Bottom line
Price what you can define, and stage what you can't. Build water heaters and other big repeat jobs from parts, so a cost change is a quick update instead of a rebuild. If you're already on Housecall Pro, start with its free service list and add your own prices; pay for Profit Rhino only if you don't have the time or the cost data to set prices yourself. If you're choosing a whole platform, don't let the pricebook alone decide it. Our free flat-rate price calculator works out a price from labor hours, your costs and the margin you want.
Once the price is set, the next step is getting paid. Our plumbing invoicing guide covers deposits, card fees and follow-up emails.