Drain slope calculator: fall, percent grade and inches per foot
Free from Relay, no signup. Defaults and sources checked November 13, 2026.
Enter the horizontal run and a slope selected for your project. This worksheet calculates the resulting fall; it does not select a permitted slope or approve the installation.
Method
Vertical fall = horizontal run × slope ratio. An inches-per-foot slope becomes a ratio when divided by 12. Percent grade becomes a ratio when divided by 100. Angle = arctan(slope ratio). Measure the horizontal run, not the longer diagonal pipe length.
Worked example
For a 20 ft horizontal run at a chosen 0.25 in/ft slope, fall is 5 inches. That slope is 2.0833%, not exactly 2%. A 2% slope over the same run gives 4.8 inches of fall. The example demonstrates arithmetic, not an approved minimum.
What this calculation covers
Geometry only. No code table, minimum-slope recommendation, fixture loading, flow capacity, venting, invert elevation, pipe support or inspection decision. Verify the adopted local requirements and design before choosing a slope. A result of zero fall describes a level line, not an acceptable drain.
Method references
Continue your work
Questions
Can I share the calculation with a customer?
Yes. Calculate, open Prepare a report, optionally add a customer or project name, and download a PDF with your inputs, method, references and limitations. Inputs stay in your browser.