Relay
Pricing
Get started
Pricing
Get started
Help

Job checklists: required steps, readings and photos

Updated November 10, 2026

A checklist in Relay is a list of steps, readings and photos a technician fills in on the job in the mobile app. You build checklists once in Settings > Checklists, and Relay adds them to matching jobs on its own, by service, job category, tag, line item or equipment. A job can't be completed until every required item is done, so a tune-up isn't closed without its readings or a required photo.

In this article

  1. Building a checklist
  2. Adding checklists to jobs
  3. One checklist per piece of equipment
  4. Filling it in on the job
  5. Common questions

Building a checklist

In Settings > Checklists, choose "New checklist", give it a "Checklist name" such as Spring AC Tune-up, and add steps under "Checklist items" with "Add item". New items start as required. Each item has a "Response type":

  • Checkbox: a step to tick off.
  • Single choice or Multiple choice: answers you name, such as Pass, Monitor and Replace. Each answer can "Flag as an issue", "Require photo" or "Require note" when the technician picks it.
  • Number: a reading, with an optional "Unit" such as °F or PSI and an expected "Minimum" and "Maximum". A reading outside the range can still be recorded and is flagged for review.
  • Text: a short answer, or a longer one with "Allow multiple lines".
  • Photo: the photo is the answer.

Two sections at the top of a new checklist can fill it in for you. In "Create from notes", type or dictate what the checklist should cover, and attach a manufacturer's manual or a paper checklist as a PDF or photo if you have one, then choose "Draft checklist". Relay writes the items and picks a response type for each, such as a number with its unit for a reading or a choice for an outcome. "Start from a template" offers six templates: HVAC installation and commissioning, HVAC maintenance, HVAC repair verification, Plumbing service and repair, Water heater installation and start-up, and Electrical service and repair. Either way you review and edit the items before saving, and expected ranges are left for you to enter for your equipment. Drafting again or picking another template swaps out the previous suggestions you haven't changed and keeps anything you typed or edited.

Under "Requirements", "Response required" decides whether the item blocks completion, and "Photo required for every answer" asks for a photo whatever the answer. A photo or note set on one answer is required only when that answer is chosen. Flagging an answer marks it for review; it doesn't create a separate job.

Adding checklists to jobs

Under "Add automatically when", choose the conditions a job must match: Service, Job category, Job tag, Service line item, Material line item, Equipment type or Equipment brand. A job has to match every condition you add.

Relay adds the checklist once to any open job that matches, including when a service, tag, line item or piece of equipment is added to the job later. It never removes a checklist because a job stops matching, and it won't add back a checklist someone removed.

To add one by hand, open the job in the web app and choose "Attach checklists" in its Checklists section, or "Manage checklists" once it has one. The section shows how many required items are complete.

One checklist per piece of equipment

A checklist can also belong to a piece of equipment. On the customer's Equipment tab, add it under "Checklists" on the equipment record. Each job linked to that equipment gets its own copy, so a visit to a home with two systems gets one completed checklist for each. See equipment records and service history.

Filling it in on the job

In the mobile app, the checklist is read-only until the technician taps Start work; it says "Start work to record responses." Progress shows as required items done out of the total, with "View remaining" to jump to what's left. Each item's "Add details" menu adds a note, photo or video, and an item that needs a photo shows "Add required photo" until one is added.

When the technician chooses "Complete job", the app refuses while required items are open: "Finish the required checklist items before completing this job." Checklists work without signal and sync when the phone reconnects.

Office users can see checklist progress on the job but can't tick items; the technician on the job fills it in.

Common questions

Can a checklist be optional?

Yes. Turn off Response required on an item and it no longer blocks completing the job. A checklist made only of optional items never blocks completion.

Can I record refrigerant pressures and temperatures?

Yes. Use a Number item for each reading, set the unit, and add the expected minimum and maximum so readings outside that range are flagged for review.

What happens if I change a checklist that's already on jobs?

Each job gets its own copy of a checklist when it's added. Jobs that get the checklist after you save use the new version; jobs that already have it keep their copy, and recorded answers keep the labels and units they were recorded with.

A technician's day in the Relay app
Book a demo

All help articles

Product

  • All features
  • AI Front Office
  • Business Phone
  • Website
  • Booking
  • Pipelines
  • Scheduling & dispatch
  • Mobile App
  • Pricebook
  • Inventory
  • Time tracking & timesheets
  • Estimates & proposals
  • Invoicing & payments
  • Customer management
  • Maintenance plans
  • Review requests
  • Customer campaigns
  • Reports & profitability

Compare

  • Relay vs Housecall Pro
  • Relay vs Jobber
  • Relay vs ServiceTitan
  • Relay vs Workiz
  • Relay vs FieldPulse

Industries

  • HVAC
  • Plumbing
  • Electrical
  • Garage door
  • Appliance repair

Legal

  • Privacy
  • Terms
  • SMS Policy
  • Account Deletion

Company

  • About
  • Guides
  • Free tools
  • Help center
  • Contact
  • Support
© 2026 Relay Ops, Inc.